In tank vertical pump – SP series pumpPost on 21-09-2015 At 10:37'- 6359 Views
- Type: vertical centrifugal pump
- Max. Flow: 320lit/min
- Max. Head: 14mAq
- Power: 1/8HP to 2HP
- Material of head pump: FRPP/ CFRPP/ CPVC/ PVDF
- Material of elastomer: NBR/ EDPM/ VITON
- Material of seal: NBR/VITON
- Specific feature:
Excellent chemical resistance
Can run dry without damage
Combined with our unique elbow union, easy to maintain
Snap ring recures the inlet and reduces the pump head for in tank applications
Single vapor seal on SP 1/4~2HP models prevents corrosive vapors from entering the bearing
Both flanges of motor have oil seals swing ring to prevent acid vapor from entering the motor
High efficiency, low operation cost, leakfree operation and easy maintenance. - Typical applications:
Suitable for chemical circulation, cooling, spraying and fume scrubber, waste treatment.
Plating solutions including electroplating
Wet processing, cleaning solutions, deliver acids - Made in: Super/ Taiwan
| Model | Specific gravity |
In/let (mm) |
Power | 50Hz | 60Hz | Weight (Kg |
||||
| HP | Phase | Pole | Max. Flow (l/min) |
Max. Head (mAq) |
Max. Flow (l/min) |
Max. Head (mAq) |
||||
| SP 20SK-1/8 | 1.1 | 25x20 | 1/8 | 1p | 2 | 28 | 4 | 38 | 5 | 6 |
| SP 20SK-1/6 | 1.1 | 25x20 | 1/6 | 1p | 2 | 32 | 4 | 60 | 5 | 6 |
| SP 20SK-1/4 | 1.1 | 25x20 | 1/4 | 1p/3p | 2 | 70 | 6 | 85 | 8 | 14 |
| SP 25SK-1/3 | 1.1 | 25x25 | 1/3 | 1p/3p | 2 | 80 | 6.5 | 100 | 9 | 15 |
| SP 25SK-1/2 | 1.1 | 40x25 | 1/2 | 1p/3p | 2 | 160 | 13 | 165 | 13 | 19 |
| SP 40SK-1 | 1.1 | 50x40 | 1 | 1p/3p | 2 | 280 | 12 | 350 | 15 | 20 |
| SP 40SK-2 | 1.1 | 50x40 | 2 | 3p | 2 | 320 | 14 | 400 | 19 | 24 |
| SP 20SP-1/6 | 1.3 | 25x20 | 1/6 | 1p | 2 | 28 | 4 | 32 | 4 | 6 |
| SP 25SP-1/3 | 1.3 | 25x25 | 1/3 | 1p/3p | 2 | 70 | 6 | 85 | 8 | 15 |
| SP 25SP-1 | 1.3 | 40x25 | 1 | 1p/3p | 2 | 200 | 11 | 185 | 12 | 20 |
| SP 40SP-1 | 1.3 | 50x40 | 1 | 1p/3p | 2 | 230 | 10 | 230 | 11 | 19 |
| SP 40SP-2 | 1.3 | 50x40 | 2 | 3p | 2 | 250 | 11 | 280 | 15 | 20 |