Small self-priming mechanical seal pump - SE series pumpPost on 23-09-2015 At 11:33'- 7977 Views
- Type: centrifugal pump
- Max. Flow: 260lit/min
- Max. Head: 14.5mAq
- Power: 1/2HP to 2HP
- Material of head pump: FRPP/PVDF
- Material of elastomer: NBR/ EDPM/ VITON
- Material of seal: Carbon/Ceramic/ SSIC/ Teflon/ Hastelloy-c/ SUS316
- Specific feature:
Excellent chemical resistance
The remained cycling liquid inside the pump head runs through the Teflon hose and cools the seal while dry running
Self priming up tp 20 feet of lift
Seal are made of various materials such as Ceramic, Carbon, SSIC so can withstand various chemicals.
The motor shaft extension is coupled to a standard motor and it is made by SUS. Teflon sleeve is installed over the shaft, there is no solution contact between the shaft assembly and chemical solution being pumped.
The pump connections are standard 1”, 1-1/2”
High efficiency, low operation cost, leakfree operation and easy maintenance.
Fluid specific gravity up to 1.8 - Typical applications:
Chemical or water recirculation
Plating solutions including electrplating - Made in: Super/ Taiwan
| Model | In/let (mm) |
Power | 50Hz | 60Hz | Weight (Kg) |
||
| Max. Flow (l/min) |
Max. Head (mAq) |
Max. Flow (l/min) |
Max. Head (mAq) |
||||
| SE 25SK-1/2 | 25x25 | 1/2HP, 3Phase, 380v, 2Pole | 155 | 7.5 | 160 | 11 | 19 |
| SE 40SK-1/2 | 40x40 | 1/2HP, 3Phase, 380v, 2Pole | 185 | 8 | 190 | 11 | 19 |
| SE 25SK-3/4 | 25x25 | 3/4HP, 3Phase, 380v, 2Pole | 175 | 9.5 | 190 | 13 | 20 |
| SE 40SK-3/4 | 40x40 | 3/4HP, 3Phase, 380v, 2Pole | 195 | 8 | 230 | 13 | 20 |
| SE 40SK-1 | 40x40 | 1HP, 3Phase, 380v, 2Pole | 225 | 11 | 250 | 15 | 21 |
| SE 40SK-2 | 40x40 | 2HP, 3Phase, 380v, 2Pole | 260 | 14.5 | 320 | 25 | 29 |